Kostal PIKO 36 EPC Operating Manual page 89

Webserver
1 2 3
Communication
n
Set the communication parameters of the inverter.
Menu item
Inverter address
Network (TCP/IP)
Network configuration
Auto-IP/DHCP
Manually
IP address:
Subnet mask:
Router/Gateway:
DNS Server:
Data export
Router/Gateway
Inverter with modem
Network info
IP address:
Subnet mask:
Router/Gateway:
DNS Server 1:
DNS Server 2:
MAC address:
© 2017 KOSTAL Solar Electric GmbH
4 5 5 6
Function
Input RS485 address of inverter.
When two or more inverters are con-
nected via RS485, each inverter must
be given its own RS485 address.
Input network, gateway and DNS
server configuration.
Configuration of the inverter network
interface (Ethernet).
As the standard default setting, the
option "Auto IP/DHCP" and "Router/
Gateway" is activated.
0 0 0 0 0 0
. .
255 255 255 255 255 255
. . .
0 0 0 0 0 0
. . .
0 0 0 0 0 0
. . .
168.192.2.32
255.255.255.0
168.192.2.1
168.192.2.1
0.0.0.0
00:80:41:ae:fd:7e
7 8 9 10
As the standard default setting, the
option "Auto IP/DHCP" is activated.
This means that the inverter acquires
its IP address from a DHCP server
or automatically generates an IP
address.
If the inverter is not allocated an
automatic IP address through a
DHCP server, the inverter can be
configured using "Manually".
The data necessary for configuration,
such as IP, router and DNS
0 0
addresses, can be found on your
router/gateway.
0 0
If the inverter is connected to a
"Router/Gateway", the "Router/
0 0
Gateway" option must be activated.
0 0
If data export using "Inverter with
modem" is selected, communication
is carried out through an inverter's
modem. This can be installed in your
own or another inverter.
"Network info" shows the addresses
which the inverter is currently using.
If the router/gateway also functions
as a DNS server, the same IP address
is displayed under DNS Server 1. If
an alternative DNS server is issued
through the "Manually" setting, the
IP address for this is displayed under
DNS Server 2.
11
INFO
89