Kostal PIKO 36 EPC Operating Manual page 91

Webserver
1 2 3
Portal configuration
n
Enter the solar portal configuration. If you want to use
a solar portal, the log data and events can be sent to
the solar portal.
Menu item
Portal code
Active portal
Last portal connection
Data export
Data logger
n
Choose from a saving interval of 5, 15 or 60 minutes.
Overvoltage protection
n
If overvoltage protection was fitted on the AC or DC
side, it can be activated or deactivated here. If an
overvoltage protection module on the AC or DC side
fails, an event about is issued about this. For more
information, see Ch. 8.6.
Plant configuration
n
This function is not supported by this device.
Switched output
n
This function is not supported by this device.
© 2017 KOSTAL Solar Electric GmbH
4 5 5 6
Function
Input box for the portal code of a
solar portal (e.g. PIKO Solar Portal
- P3421).
Display of the active portal.
Displays how many minutes ago the
inverter last transferred data to the
solar portal (when the function is
active).
Removal of the "check" deactivates
sending to the solar portal.
7 8 9 10
The solar portal can only be used for
inverters which are connected directly
to the Internet or connected with one
another by means of the Ethernet
(LAN).
When 5 minutes is selected, the data
can be saved for approximately 130
days. When 15 minutes is selected,
the data can be saved for approxi-
mately 400 days. When 60 minutes is
selected, the data can be saved for
approximately 1500 days. When the
internal memory is full, the oldest data
will be overwritten.
11
INFO
INFO
91