Parameter Comparisons - Mitsubishi Electric MELSEC-A Series Manual

4
REPLACEMENT OF THE MELSECNET/10 (PLC TO PLC NETWORK)

4.5 Parameter Comparisons

(1) Parameter of control station
Parameter
A/AnS/QnA/QnAS series
name
MELSECNET/10 module
Network type
Starting I/O No.
Network No.
Total number of (slave)
stations
Network
parameter
Network range
assignment
(common
parameter)
Station inherent parameter
Refresh parameters
Inter-link data transfer
Routing parameters
Valid module during other
station access
4
- 15
Description
Q series
MELSECNET/H module
(MELSECNET/10 mode)
Network type
Starting I/O No.
Network No.
Total number of (slave)
stations
- Group No.
- Mode
Monitoring
time
LB/LW setting
LX/LY setting
Network range
I/O master
assignment
station
(common
specification
parameter)
Reserved
station
designation
Supplemental
settings
Station inherent parameter
Refresh parameters
Inter-link data transfer
Routing parameters
Valid module during other
station access
: Compatible, : Partial change required, ×: Incompatible
Compat-
Precautions for replacement
ibility
Network No.240 to No.255 cannot be
set.
Alternate them with unused network
Nos.
Set the group No. in GX Works2 or
GX Developer network parameters.
Set the mode in GX Works2 or GX
Developer network parameters.
Monitoring
time
LB/LW setting
LX/LY setting
I/O master
station
specification
Reserved
station
designation
Supplemental
settings