Appendices; Appendix 1 External Dimensions; Appendix 2 Spare Parts Storage - Mitsubishi Electric MELSEC-A Series Manual

APPENDICES

Appendix 1 External Dimensions

For external dimensions of modules shown in this handbook, refer to the user's manual for each
module.

Appendix 2 Spare parts storage

(1) The general specifications of programmable controllers are as follows. Please do not
store spare parts under a high temperature or high humidity condition, even within the
range guaranteed by the specifications.
Storage ambient temperature
Storage ambient humidity
(2) Store in a place avoiding direct sunlight.
(3) Store under a condition with no dust or corrosive gas.
(4) The capacity of the batteries (such as an A6BAT battery and an A8BAT battery) or a
lithium-coin battery (commercially available) for memory card is decreased by its self-
discharging even when it is not used. Replace it with new one in 5 years as a guideline.
(5) For a power supply module, CPU module with built-in power supply, or analog module
that uses any aluminum electrolytic capacitor, which is indicated in the table below, take
the following measures since the characteristics will be deteriorated when the
aluminum electrolytic capacitor is left un-energized for a long time.
Product
CPU module
(Power supply built-in type)
Power supply module
Analog module
-20 to 75°C
10 to 90%, no condensation
A1NCPU, A1NCPUP21, A1NCPUR21, A1NCPUP21-S3, A2CCPU
A2CCPUP21, A2CCPUR21, A2CCPUC24, A2CCPUC24-PRF
A2CJCPU-S3
A1SJHCPU
A61P, A61PEU, A61P-UL, A62P, A62PEU, A63P, A68P, A61RP, A67RP
A2CJ66P
A1S61PN, A1S62PN, A1S63P
A62DA, A62DA-S1
A1S64AD, A1S68AD, A1S62DA, A1S68DAI, A1S68DAV,
A1S63ADA, A1S66ADA
Model
APPX
- 1