Mitsubishi Electric MELSEC-A Series Manual page 168

5
REPLACEMENT OF THE MELSECNET/10 (REMOTE I/O NETWORK)
(2) Replacement of the QnA/QnAS series
Network type
Optical loop
Coaxial loop
Coaxial bus
Remarks
System configuration in MELSECNET/10 and MELSECNET/H (remote I/O network)
The following table lists CPU modules that can be installed on MELSECNET/10 and MELSECNET/H
(remote I/O network). (The table shows in the case using a module for optical loop. The same applies
in the case using a module for a coaxial loop/coaxial bus.)
CPU module
QnUCPU
QnA/QnASCPU
AnU/AnUS(H)CPU
AnN/AnA/AnSCPU
(excluding AnUS(H)CPU)
*1 The module with a serial number (first five digits) of "15012" or later can be used. For replacement using MELSECNET/10
mode, refer to Section 5.2.
5
- 2
Station type
Remote master station
Remote I/O station
Remote master station
Remote I/O station
Remote master station
Remote I/O station
Master station
Network module
QJ71LP21-25
A(1S)J71QLP21
A(1S)J71LP21
Master station on
the remote I/O
network cannot be
used.
QnA/QnAS series
AJ71QLP21
A1SJ71QLP21
AJ71QLP21S
A1SJ71QLP21S
AJ71QLP21G
AJ72QLP25
A1SJ72QLP25
AJ72QLP25G
AJ71QLR21
A1SJ71QLR21
AJ72QLR25
AJ71QBR11
A1SJ71QBR11
AJ72QBR15
A1SJ72QBR15
Remote I/O station
QJ72LP25-25 A(1S)J72LP25
(MELSECNET/H
mode)
*1
(MELSECNET/10
mode)
*1
(MELSECNET/10
mode)
-
Q series
QJ71LP21-25
QJ71LP21S-25
QJ71LP21G
QJ72LP25-25
QJ72LP25G
QJ71BR11
QJ72BR15
QJ71BR11
QJ72BR15
A(1S)J72QLP25
×
-