Reset Parameters To Default Settings; Call Saved Customer Settings; Search Changed Parameters; Automatic Edit Function - Toshiba TOSVERT VF-nC3E Instruction Manual

Reset parameters to default settings 
Use the  parameter to reset all parameters back to their default settings. To use this function, set parameter
=.
 Refer to section 4.3.2 for details.
Call saved customer settings 
Customer settings can be batch-saved and batch-called.
These settings can be used as customer-exclusive default settings.
To use this function, set parameter = or .
 Refer to section 4.3.2 for details.
4
Search changed parameters 
Automatically searches for only those parameters that are programmed with values different from the standard
default setting. To use this function, select the  parameter.
 Refer to section 4.3.1 for details.
4.3.1
 : Automatic edit function
• Function
Automatically searches for only those parameters that are programmed with values different from the standard
default setting and displays them in the . Parameter setting can also be changed within this group.
Note 1: If you reset a parameter to its factory default, the parameter will no longer appear in .
Note 2: It may take several seconds to display changed parameters because all data stored in the user parameter
group  is checked against the factory default settings. To cancel a parameter search, press the MODE
key.
Note 3: Parameters which cannot be reset to the default setting after setting  to  are not displayed.
⇒ Refer to section 4.3.2 for details.
Searching for and resetting changed parameters
D-8
E6582233