Output Of Set Frequency Speed Reach Signal; Speed Reach Setting Frequency - Toshiba TOSVERT VF-nC3E Instruction Manual

Output frequency attainment signal
: OUT-NO terminals
Inversion of output frequency
attainment signal
6.1.3

Output of set frequency speed reach signal

 : Speed reach setting frequency
 : Speed reach detection band
 Function
When the output frequency becomes equal to the frequency set by  , an ON or OFF
signal is generated.
[Parameter setting]
 Parameter setting of frequency and detection band
Title

Speed reach setting frequency


 Speed reach detection band
 Parameter setting of output terminal selection
Title
Output terminal

selection 1A (OUT)
Setting value 9 is reverse signal.
Note: Set  to assign to FLA-FLC-FLB terminals.
Output frequency [Hz]
Designated frequency  
Setting frequency
Designated frequency  
0
Function
Function Adjustment range
0-255
(Refer to section 10.6)
F-3
Adjustment range
0.0 -  (Hz)
0.0 -  (Hz)
Setting
8: RCHF (Set frequency attainment
signal)
E6582233
Time [s]
ON
OFF
ON
OFF
6
Default setting
0.0
2.5