Analog Devices ADSP-2189M EZ-KIT Lite Manual page 55

(Figure 3-4). This interface provides a simpler target board connection
that requires fewer mechanical clearance considerations than other
ADSP-2100 EZ-ICEs. The ADSP-2189M device need not be removed
from the target system when using the EZ-ICE, nor are any adapters
needed. Due to the small footprint of the EZ-ICE connector, emulation
can be supported in final board designs.
The EZ-ICE performs provides:
• In target operation
• Setting up to 30 breakpoints
• Single stepping or full speed operation
• Examining and altering registers and memory values
• Uploading and downloading PC functions
• Instruction-level emulation of program booting and execution
• Complete assembly and disassembly of instructions
• C source-level debugging
The EZ-ICE header is a 14-pin header with the connections shown in
Figure 3-4.
ADSP-2189M EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Hardware Reference
3-13