Firmware Version - Thermo Scientific RadEye SPRD Operating Instructions Manual

13.3

Firmware version

V 1.00
First edition
V 1.03
•
Error correction:
o Sometimes the acoustic dose alarm could not be ac-
knowledged
o While ID measurement (after measurement is stopped
and started again) the old intermediate result can be
seen during the current measurement.
o Ratemeter mode with dual display: in case of a single
Neutron alarm the Neutron measuring value wasn't
inverted in the display.
o The energy line of the detected nuclides are now saved
with spectrum data
o Logbook: multiple entries of identical events is pre-
vented
o The display of the remaining time if the measuring
time was increased by pressing the right button
•
Revised nuclide library. Medical nuclides, Th-232 and U-
232 are optimized
•
The first key press activates the background illumination,
without any other action. With the exception of alarm ac-
knowledgement
•
Lutetium adjust adapts to the background. Revised user
guidance.
13-8 DB-100 E RadEye SPRD
Pi/Ff 04.11.2014