Sub Menu "Nuc Id Settings; Count Rate - Thermo Scientific RadEye SPRD Operating Instructions Manual

3.4.2

Sub menu "Nuc ID Settings"

SUB MENU "ID
SETTINGS"
Auto Meas.time
Set Meas.time
Autosave
Load spectrum
Trigger list
Backgnd spectrum Starts a background measurement
Send spectrum
Clear spectra
Set ID warning
3-22
DESCRIPTION OF THE FUNCTION
If selected, the RadEye will identify the mea-
suring time.
If deselected, the ID measurement uses the
predefined time.
Edits the measuring time used for measure-
ment with fixed time
If selected, the RadEye saves the spectrum
after measurement is complete.
Loads a saved spectrum (see 3.3.4)
Select a predefined trigger list for nuclide
identification
Sends the current spectrum in XML-N42.42
format.
Deletes all saved spectra
Modifies warning thresholds for Neutron
count rate and Gamma dose rate
DB-100 E RadEye SPRD
Pi/Ff 04.11.2014