Advertisement
Quick Links
RadEye SPRD - Quick Start Guide
Power on
Press and hold
until the Start
screen appears
Ratemeter
Can be configured to display dose rate or count rate in the main display
RAD Detected
Immediate
classification -
Natural or Artificial
Identification and Classification
Automatically classify and ID gamma radiation after receiving an alarm
cycling of current level for
gamma (G) & neutron (N)
percent complete
distance to source check and
current count rate
Start screen
radiation
Alarm being analyzed
RadEye is learning
background. For
highest sensitivity,
wait until "Learning"
disappears before use
Action required!
Ready for use
If simplified ID is enabled,
the unit will automatically
begin analyzing the
source to identify and
classify the radiation.
See below.
Consult
manual for full
definitions of all
result screens
Advertisement
Related Manuals for Thermo Scientific RadEye SPRD
Summary of Contents for Thermo Scientific RadEye SPRD
- Page 1 RadEye SPRD - Quick Start Guide Power on Press and hold RadEye is learning Start screen Ready for use until the Start background. For screen appears highest sensitivity, wait until “Learning” disappears before use Ratemeter Can be configured to display dose rate or count rate in the main display...
- Page 2 Finder Mode Quickly pinpoint radiation sources using simple graphical display of source strength Tap until graphical Above line = alarms Alarm Threshold Line Real time count rate screen is displayed Highest peak is center of source Optimization with Lu Test Adapter Routine automatically Fast, field optimization to keep RadEye operating at its best starts when Lu...