Adjusting Projected Images; Correcting Distortion In The Projected Image - Epson EB-L30002U User Manual

Adjusting Projected Images

Correcting Distortion in the Projected Image

You can correct keystone distortion in projected images using one of the
following methods.
 H/V-Keystone
This allows you to correct distortion in the horizontal and vertical
directions independently.
"H/V-Keystone" p.63
s
 Quick Corner
Correct the four corners independently.
"Quick Corner" p.64
s
 Curved Surface
Correct distortion that occurs when projecting on a curved surface, and
adjust the amount of expansion and contraction.
"Curved Surface" p.65
s
 Corner Wall
This allows you to correct distortion that occurs when projecting on a
surface with right angles, such as a square pillar or the corner of a room,
and adjust the amount of expansion and contraction.
"Corner Wall" p.69
s
 Point Correction
Corrects slight distortion which occurs partially, or adjusts the image
position in an overlapping area when projecting from multiple projectors.
"Point Correction" p.72
s
62