Base - Epson EB-L30002U User Manual

Part Names and Functions
Name
 Installs the optional wireless LAN unit.
B
USB-A port cover
(USB-A port) s "Installing the Wireless LAN Unit"
 This is used for batch settings.
s "Batch Setup"
 Connects a USB flash drive to save the projector's
operation logs.
s Extended - Operation - Log Save
Destination
 Connects to the power port for the video receiver,
network equipment, or optical HDMI cable (for
extending). Operations for all equipment are not
guaranteed. Check that you can operate your equipment
when using this connector.
C
Security slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s "Anti-Theft Lock"
D
Connector ports s "Connector Ports"
E
Control panel s "Control Panel"
F
Cable holder Attach this to the power cord to prevent the cord from
falling out.
G
Connects the power cord to the projector.
Power inlet
H
Supplies power to the projector.
Main power switch
Function
p.165
p.147
Attention
When using the projector with the cover re‐
moved, be careful not to lose the cover.
p.119
p.20
p.22
Name
I
Remote receiver
p.55

Base

Name
A
Handle securing
section (6 points)
B
Feet
Function
Receives signals from the remote control.
Function
Installs the handle supplied.
You can remove these from the projector and attach them
to the handle. The feet are detachable. You can extend the
feet by approximately 16 mm before they detach.
19