Setting Up Wireless Network Security - Epson EB-L30002U User Manual

Wireless Network Projection

Setting Up Wireless Network Security

You can set up security for your projector to use on a wireless network. Set
up one of the following security options to match the settings used on your
network:
 WPA2-PSK security
 WPA2-EAP security *
 WPA/WPA2-PSK security *
 WPA/WPA2-EAP security *
* Only available for the Advanced connection mode.
a
Contact your network administrator for guidance on entering the
correct information.
a
Save the certificate in a format supported by the projector in the
root directory of the USB storage device.
"Supported Client and CA Certificates"
s
b
Press the [Menu] button on the control panel or remote control.
c
Select the Network menu and press [Enter].
d
Select Network Configuration and press [Enter].
e
Select the Wireless LAN menu and press [Enter].
f
g
p.129
h
i
Select the Security setting and press [Enter].
Select the security settings to match your network settings.
 WPA2-PSK, WPA/WPA2-PSK:
Select Setup complete. Follow the on-screen instructions to save
the settings and close the menu.
 WPA2-EAP, WPA/WPA2-EAP:
Select EAP Method and press [Enter].
Select the protocol for authentication as the EAP Type setting.
To import your certificate, select the certificate type and
press [Enter].
 Client Certificate for the PEAP-TLS or EAP-TLS type
 CA certificate for the PEAP, PEAP-TLS, EAP-TLS, or EAP-FAST
type
127