Table of Contents
Advertisement
Problem Solving
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?
Projection stops automatically
Check
Is Sleep Mode set to On?
"Not supported" is displayed
Check
Do the image signal resolution and the refresh rate correspond to the
mode?
(Only when projecting computer images)
"No Signal" is displayed
Check
Are the cables connected correctly?
Is the correct port selected?
Is the power for the computer or video source turned on?
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Press the [
] button to turn on the power. If you do not want to use Sleep Mode, change the setting to Off.
s Extended - Operation - Sleep Mode
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
the computer.
s "Supported Monitor Displays"
p.264
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
Change the image by pressing the [Search] button.
s "Automatically Detecting Input Signals and Changing the Projected Image (Source Search)"
Turn the power on for the equipment.
Remedy
Remedy
p.147
Remedy
Remedy
202
p.60
Advertisement
Table of Contents
