Secure HTTP
e
Select the Others menu and press [Enter].
f
Select On as the Secure HTTP setting.
g
Select Web Server Cert. and press [Enter].
h
Select Register and press [Enter].
i
Connect the USB flash drive to the USB-A port on the projector.
If the wireless LAN module is already installed in the projector,
remove it.
"Installing the Wireless LAN Unit"
s
j
Press [Enter] to display the certificate list.
k
Select the certificate to import using the displayed list.
A message is displayed prompting you to enter the password for the
certificate.
l
Enter a password and press [Enter].
The certificate is imported and a completion message appears.
Supported Web Server Certificates
Web Server Certificate (Secure HTTP)
p.55
Setting a certificate using a Web browser
You can register these types of digital certificates.
Item
PKCS#12
Format
PFX, P12
Extension
Encryption
RSA
MD5/SHA-1/SHA-256/SHA-384/SHA-512
Hashes
512/1024/2048/4096 bit
Key length
Common Name
Network Host Name
Optional
Organization
You need to setup a password. Up to 32 single-byte
Password *
alphanumeric characters
* You can set a password using up to 64 alphanumeric characters. When
entering more than 32 characters, use your Web browser to enter the text.
"Setting a certificate using a Web browser"
s
You can use an electronic certificate as the projector's security settings.
a
You can install the electronic certificate from the projector's Network
menu. However, be sure to register just once or the certificate may not
install correctly.
s "Setting Up Wireless Network Security"
a
Prepare a certificate that is supported by the projector.
134
Explanation
p.134
p.127