Adjusting Projected Images
a
Select Frame Interpolation from Image Enhancement, and then
press the [
] button.
b
Select the level of interpolation from Low, Normal or High.
Set to Off if noise occurs after setting them.
c
Press the [Menu] button to finish making settings.
Noise Reduction
You can smooth out rough images for softer image quality when inputting
progressive signals or progressive interlace signals.
a
You cannot set Noise Reduction in the following situations.
When 4K Enhancement is enabled
When a signal with a horizontal resolution greater than 1920 is
being input
When Image Preset Mode is set to Off
a
Select Noise Reduction from Image Enhancement, and then
press the [
] button.
b
Use the [ ][ ] buttons to adjust the value.
c
Press the [Esc] button to return to the previous screen.
MPEG Noise Reduction
You can reduce dot and block noise that occurs in outlines when projecting
MPEG movies.
a
You cannot set MPEG Noise Reduction in the following situations.
When 4K Enhancement is enabled
When a signal with a horizontal resolution greater than 1920 is
being input
When Image Preset Mode is set to Off
a
Select MPEG Noise Reduction from Image Enhancement, and
then press the [
] button.
83