Table of Contents
Advertisement
Adjusting Projected Images
a
If the [Esc] button is pressed for approximately two seconds,
the confirm default reset screen is displayed.
Select Yes to reset the result of Quick Corner corrections.
d
Use the [
], [
], [ ], and [ ] buttons to correct the position of
the corner.
When you press the [
allows you to select the area to be corrected is displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
] button, the screen shown in step 3 that
e
Repeat steps 3 and 4 as needed to adjust any remaining corners.
f
To complete the corrections, press the [Menu] button.
a
Point Correction allows you to fine tune the corrected results.
s "Point Correction"
Curved Surface
This allows you to correct distortion that occurs when projecting on a
curved surface, and adjust the amount of expansion and contraction.
Face the projector directly opposing the screen with the lens position
moved to the home position.
"Adjusting the Position of the Projected Image (Lens Shift Adjustment)"
s
p.37
p.72
65
Advertisement
Table of Contents
