Table of Contents
Advertisement
Adjusting Projected Images
Correcting Distortion in the Projected Image
You can correct keystone distortion in projected images using one of the
following methods.
• H/V-Keystone
Correct distortion in the horizontal and vertical directions independently.
"H/V-Keystone"
p.63
s
• Quick Corner
Correct the four corners independently.
"Quick Corner"
p.64
s
• Curved Surface
Correct distortion that occurs when projecting on a curved surface, and
adjust the amount of expansion and contraction.
"Curved Surface"
p.65
s
• Corner Wall
Correct distortion that occurs when projecting on a surface with right
angles, such as a square pillar or the corner of a room, and adjust the
amount of expansion and contraction.
"Corner Wall"
p.75
s
• Point Correction
Corrects slight distortion which occurs partially, or adjusts the image
position in an overlapping area when projecting from multiple projectors.
"Point Correction"
p.84
s
62
Advertisement
Table of Contents
