Epson EB-L30002U User Manual page 92

Multi-Projection Function
Submenu
Edge Blending
Top Edge/Bottom
Edge/Left Edge/Right
Edge
Line Guide
Pattern Guide
Guide Color
Function
Set to On to activate Edge Blending. Set to Off
when not projecting from multiple projectors.
Blending: Set to On to activate Edge Blending
towards your settings, and the blend range will be
shaded.
Blend Start Position: Displays blending start
position as a red line, and adjusts at the level of one
pixel.
Blend Range: Adjusts the range to be shaded.
Adjustment is possible at the level of one pixel. The
maximum range is 45% of the resolution.
Blend Curve: Adjusts how to apply shading.
Set to On to display a guide on the Edge Blending
setting range.
Set to On to display a lattice pattern to match the
position of the Edge Blending setting range.
Select a combination of guide colors from the six
provided.
d
Turn on Edge Blending.
(1)
Select Edge Blending, and then press the [
(2)
Select On, and then press the [
(3) Press the [Esc] button.
e
Set Guide Display to On.
(1)
Select Guide Display, and then press the [
(2)
Select On, and then press the [
(3) Press the [Esc] button.
a
If the guide is not clear, you can change the color of the guide
in Guide Color.
f
Set Pattern Guide to On.
(1)
Select Pattern Guide, and then press the [
(2)
Select On, and then press the [
(3) Press the [Esc] button.
g
Set Top Edge, Bottom Edge, Left Edge, or Right Edge according
to the parts of the image that are overlapped.
The following shows how to set screen (1) as an example.
92
] button.
] button.
] button.
] button.
] button.
] button.