Table of Contents
Advertisement
Image Maintenance
(2)
Select a combination of R (red), G (green), and B (blue) for the grid color.
R/G/B: Displays a combination all three colors; red, green and blue. The
actual color of the grid is white.
R/G: This is available when R is selected from Select Color. Displays a
combination of two colors; red and green. The actual color of the grid is
yellow.
G/B: This is available when B is selected from Select Color. Displays a
combination of two colors; green and blue. The actual color of the grid is
cyan.
(3)
Press the [Esc] button to return to the previous screen.
g
Select Start Adjustments, and then press the [
First, select Shift the whole panel to adjust the entire LCD panel.
When the start confirmation message is displayed, press the [
button to start adjustment.
a
The image may become distorted while adjusting. The image is
restored once adjustments are complete.
h
Use the [
], [
], [ ], and [ ] buttons to make adjustments, and
then press the [
] button.
i
To perform more detailed adjustments, select Adjust the four
corners, and then press the [
j
Use the [
], [
], [ ], and [ ] buttons to make adjustments, and
then press the [
] button to move to the next adjustment point.
k
When you have adjusted all four corners, select Exit, and then
press the [
] button.
] button.
]
] button to confirm.
If you feel you still need to make adjustments after correcting all
four points, select Select intersection and adjust and then continue
making adjustments.
Color Uniformity
Adjusts the color tone for the whole screen. Adjustment details are saved
for each color mode.
a
The color tone may not be uniform even after performing color
uniformity.
We recommend that you reset the following settings on the Image
menu to display the adjustment screen at the appropriate brightness
and color.
- Brightness
- Contrast
- Color Saturation
- Tint
- White Balance (Color Temp., G-M Correction, Offset R, Offset G,
Offset B, Gain R, Gain G, Gain B)
- Gamma
- RGBCMY
226
Advertisement
Table of Contents
