Table of Contents
Advertisement
Batch Setup
c
While holding down the [Esc] button, turn on the main power
switch.
When the projector's indicators turn on as follows, release the [Esc]
button.
Power
Status
Blue - On
Blue - On
The projector is recognized as a removable disk by the computer.
d
Open the removable disk, and save the batch setup file
(PJCONFDATA.bin) to the computer.
a
If you need to change the name of the batch setup file, add text
after PJCONFDATA. If you change the file name, the projector
may not be able to recognize the file correctly.
e
Perform "Remove USB device" on your computer, and then
disconnect the USB cable.
Laser
Temp
Orange - On Orange - On
a
When using Mac, perform "Remove EPSON_PJ".
The projector enters standby status.
170
Advertisement
Table of Contents
