Adjusting The Position Of The Projected Image (Lens Shift Adjustment) - Epson EB-L30002U User Manual

Installing the Projector
Standard Cross-hatching
Cross-hatching Cross-hatching
Y
Color Bars V Color Bars H
Gray Bars H Checkerboard
Black 16:10 Aspect
Frame
a
 To set menu items that cannot be set while the test pattern is
being displayed or to fine-tune the projected image, project an
image from the connected device.
 You can also select a test pattern from the Configuration
menu.
s Settings - Test Pattern
c
Press the [Esc] button to close the test pattern.
Cross-hatching Cross-hatching
C
Cross-hatching Cross-hatching
R G
Grayscale Gray Bars V
Checkerboard White
1 2
16:9 Aspect 4:3 Aspect
Frame Frame
p.145
Adjusting the Position of the Projected Image
M
(Lens Shift Adjustment)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
B
screen.
The ranges within which the image can be moved are shown below. The
position of the projected image cannot be moved to both the horizontal and
vertical maximum values.
When using the ELPLR05
A
B
C
* When the horizontal direction is at the maximum value, the image
cannot be moved up or down.
Center of lens
Projected image when the lens position is moved to the home
position
*
Maximum motion range: V x 15%
37