List of Functions
Submenu
Reset All Config
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
Memory, User's Logo, all items for Network menus, Language,
Date & Time, Panel Alignment, Color Uniformity, Lens
Calibration, Color Calibration, Projector Grouping, Screen
Matching, Color Matching, Light Source Info, Operation
Hours, and User Default Setting.
Reset All (User Default): Returns each setting to the User
Reset All (Factory
Default Setting. You need to enter a password to perform a reset.
Default)
Reset All (Factory Default): Resets all of the projector's settings.
However, Date & Time, Operation Hours, Light Source Info,
Password Protection items and their passwords are not reset.
You need to enter a password to perform a reset.
User Default Setting: Set the default settings for the following
items.
Light Source Mode
Brightness Level
Constant Brightness
A/V Output
Standby Mode
Standby Confirmation
Messages
Beep
Sleep Mode
Shutter Timer
Shutter Release
Color Mode
Wireless Mode
Wired LAN DHCP
Password: Set the password required to perform Reset All (User
Default) or Reset All (Factory Default). The default password is
set to "0000". Change this to your own desired password.
Function
164