Epson EB-L30002U User Manual page 24

Part Names and Functions
Name
A
Starts projection when the main power switch is on and
[ ] button
the projector is in standby mode.
B
Places the projector in standby mode when the main
[t] button
power switch is on and it is projecting.
C
Changes to images from each input port.
Change input buttons
s "Switching to the Target Image"
D
Select any frequently used item from the Configuration
[User1] button
menu items, and assign it to any of these buttons. By
[User2] button
pressing the button, the assigned menu item selection/
[User3] button
adjustment screen is displayed, allowing you to make one-
touch settings/adjustments.
s "Settings Menu"
E
Each time the button is pressed, the aspect mode changes.
[Aspect] button
s "Changing the Aspect Ratio of the Projected Image"
p.78
F
If pressed while projecting analog RGB signals from the
[Auto] button
Computer port or the BNC port, you can automatically
optimize Tracking, Sync., and Position.
G
[Freeze] button Images are paused or unpaused.
s "Freezing the Image (Freeze)"
H
[Default] button Enabled when [Default]: Reset is displayed on the
configuration menu guide. The settings being adjusted are
returned to their default values.
s "Configuration Menu Operations"
I
[Menu] button Displays and closes the Configuration menu.
s "Configuration Menu Operations"
Function
p.61
p.145
p.107
p.137
p.137
Name
 Press to adjust focus, zoom, distortion, and lens shift.
J
[ ][ ][ ][ ]
s "Adjusting the Position of the Projected Image
buttons
(Lens Shift Adjustment)"
s "Adjusting the Image Size"
s "Correcting the Focus"
 If pressed when the Configuration menu or the Help
screen is displayed, menu items and setting values are
selected.
s "Configuration Menu Operations"
K
When the Configuration menu or the Help screen is
[ ] button
displayed, it accepts and enters the current selection and
moves to the next level.
s "Configuration Menu Operations"
L
Shows or hides the Configuration.
[On-Screen] button
M
Press to adjust the zoom.
[Zoom] button
s "Adjusting the Image Size"
N
[Focus] button Press to adjust the focus.
s "Correcting the Focus"
O
[Lens Shift] button Press to adjust the lens shift.
s "Adjusting the Position of the Projected Image (Lens
Shift Adjustment)"
If pressed for more than three seconds, the lens position
moves to the home position.
 Enter the Password.
P
Numeric buttons
s "Setting Password Protection"
 Use this button to enter numbers in Network settings
from the Configuration menu.
Q
Hold down this button and press the numeric buttons to
[ID] button
select the ID for the projector you want to operate using
the remote control.
s "ID Settings"
24
Function
p.37
p.39
p.40
p.137
p.137
p.39
p.40
p.37
p.115
p.43