Table of Contents
Advertisement
Problem Solving
Moving images are not displayed (only the moving image portion turns black)
Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?
Projection stops automatically
Check
Is Sleep Mode set to On?
The message "Not supported" is displayed
Check
Is the image signal format setting correct?
(Only when projecting images from a video source)
Do the image signal resolution and refresh rate correspond to the
mode?
(Only when projecting computer images)
The message "No Signal" is displayed
Check
Are the cables connected correctly?
Is the correct port selected?
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.
s Extended - Operation - Sleep Mode
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal
p.77
See the documentation supplied with the computer for how to change the image signal resolution and refresh rate output
from the computer.
s "Supported Monitor Displays"
p.142
Check that all the cables required for projection are securely connected.
Change the image by pressing the [Source Search] button on the remote control or the control panel.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)"
Remedy
Remedy
p.80
Remedy
Remedy
101
p.32
Advertisement
Table of Contents
