Problem Solving
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?
Projection stops automatically
Check
Is Sleep Mode set to On?
"The EDID is not set." is displayed
Check
Is the EDID set correctly?
"Not supported." is displayed
Check
Do the image signal resolution and the refresh rate correspond to the
mode?
(Only when projecting computer images)
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Press the [
] button to turn on the power. If you do not want to use Sleep Mode, change the setting to Off.
s Extended - Operation - Sleep Mode
Disconnect the cable for the image currently being projected from the projector, and then make EDID settings again.
Also, make sure you restart the projector after making EDID settings.
s Signal - Advanced - EDID
p.146
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
the computer.
s "Supported Monitor Displays"
p.266
Remedy
Remedy
p.150
Remedy
Remedy
194