Cisco TelePresence MX700 and MX800
Introduction
Peripherals configuration
xConfiguration Peripherals Profile TouchPanels
Define the number of touch panels that are expected to be connected to the video system.
This information is used by the video system's diagnostics service. If the number of connected
touch panels does not match this setting, the diagnostics service will report it as an inconsis-
tency. Note that only one Cisco Touch controller is supported in this version.
Requires user role: ADMIN
Default value: Minimum1
USAGE:
xConfiguration Peripherals Profile TouchPanels:
where
TouchPanels
: NotSet/Minimum1/0/1/2/3/4/5
NotSet: No touch panel check is performed.
Minimum1: At least one touch panel should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the
video system.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API
xConfiguration
xConfiguration
TouchPanels
xCommand
Phonebook configuration
xConfiguration Phonebook Server [1] ID
Define a name for the external phone book.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Phonebook Server
where
ID
: String (0, 64)
The name for the external phone book.
xConfiguration Phonebook Server [1] Type
Select the phonebook server type.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Phonebook Server
where
Type
: Off/VCS/TMS/CUCM
Off: Do not use a phonebook.
VCS: The phonebook is located on the Cisco TelePresence Video Communication
Server.
TMS: The phonebook is located on the Cisco TelePresence Management Suite server.
CUCM: The phonebook is located on the Cisco Unified Communications Manager.
67
API Reference Guide
xStatus
Appendices
n
ID: "ID"
Type:
n
Type
Copyright © 2016 Cisco Systems, Inc. All rights reserved.