Table of Contents
Advertisement
3.4
SM5/1250 – Linear transducer
Technical specifications
Manufacturer:
Designation:
Article number:
Operating voltage:
Stroke length:
Resolution:
Max. speed:
Size:
Weight:
Colour:
Application
SM5 is used during stop timing to give the position and speed of a moving machine part (industrial robot arm,
carriage, cutter, etc.) to Smart Logger.
The housing has three magnets in the base and three on one side so that it can easily be attached to different
ferrous surfaces and machine parts, etc.
The wire can be applied to the moving machine part by means of a magnet or snap hook.
In order to achieve best results the sensor housing should be adjusted so that the machine movement takes place
in line with the alignment of the wire.
The connection cable of SM5 is connected to the encoder connector (I8) on Smart Logger.
Operation
The transducer utilises a digital incremental pulse encoder with a resolution of 10 pulses/mm. Its two-channel
pulse-train is evaluated by Smart Logger to determine the position, speed of movement, and direction of the
moving machine part.
2TLC172188M0201, rev. H
2012-01-03
ABB AB / JOKAB SAFETY
SM5/1250
2TLA070300R0400
Supplied from Smart Logger
1250 mm
0.1 mm (10 pulses/mm)
5 m/s
106 x 88 x 100 mm (L x W x H)
1.0 kg
Black/Yellow
12
www.abb.com/lowvoltage
Advertisement
Table of Contents
