Table of Contents
Advertisement
3-1-3.
Connection Using the HXCE-FB70 Power Supply Unit
SDI RETURN (HD/SD)
VBS RETURN
PROMPTER
(VBS)
REFERENCE
(HD/SD)
*1: The maximum transmission distance is 250 m (820 ft) when Sony CCFN-25/50/100 Hybrid Fiber Cable is used.
*2: The maximum transmission distance is 10 km (32,800 ft) when a general single-mode optical fiber cable with an LC connector is used.
When using a Sony's hybrid fiber cable CCFN-25/50/100 or an SMPTE cable (LEMO's connector), confirm that the input AC power line
of the HXCE-FB70 and HXCU-FB70 is securely grounded.
Note
• Connect the single-mode optical fiber cable as shown below so that connecting destinations cross (A to B, B to A)
between this unit and the HXCE-FB70.
Single-mode optical fiber
HXCU-FB70
cable (pair)
A
B
• The single-mode optical fiber cable used for the connection must use the cable that the following specifications are
complied with.
- Terminal shaped: PC (Physical Contact) polishing or Advanced PC etc. PC polishing compatible cable
- Wavelength : 1310 nm compliant
HXCU-FB70
RCP-1500 series
REMOTE
SYNC
PIX
COMPONENT (HD/SD)
RGB (HD/SD)
HD SDI/SD SDI
VBS
HDMI
S-VIDEO
HXCE-FB70
A
B
Power Supply
Unit
HXCE-FB70
Single-mode optical fiber
2
cable (pair) *
Monitor
HXC-D70
Optoelectrical composite
1
cable*
3-3
Advertisement
Table of Contents
