Sony HXCU-FB70 Service Manual page 25

The rail attaching position varies depending on the unit mounting height in the rack.
Inner rail
1.5U
1.5U
1. Pull out the inner rail while pressing the rail stopper.
Outer rail
2. Install the inner rail to the unit with six screws (B4 x 8).
Note
This figure shows attaching the inner rails at the upper part. The same method applies for attaching the inner rails
at the lower part.
Inner rail
B4 x 8
HXCU-FB70
Inner rail
Other equipment
HXCU-FB70
HXCU-FB70
Other equipment
Stopper
Inner rail
Inner rail
When mounting this unit under other equipment,
install the inner rail at the upper part (1U) of the
unit.
When mounting this unit above other equipment,
install the inner rail at the lower part (1U) of the
unit.
B4 x 8
1U
0.5U
0.5U
1U
1-15