Table of Contents
Advertisement
2-3.
Upgrading the Software Programs
The ROM (IC109 and IC110 on the AT-191 board and IC907 on the DPR-337F board) version can be upgraded using
a Memory Stick.
For upgrading the software programs, follow the procedures below.
2-3-1.
Upgrading the Main Program
Equipment required
Memory Stick
Check
Check the current main program version with "ROM Version" of status display. (Refer to the Operating Instructions.)
Preparation
Copy the upgrading program to the Memory Stick in the following steps.
Note
To get the upgrading program (program files "HXCUFB70.rom" and "HXCUFB70_BOOT.rom"), contact your local
Sony Sales Office/Service Center.
1.
Make the following directory on the Memory Stick.
\MSSONY\PRO\CAMERA\HXCUFB70
2.
Copy the program files "HXCUFB70.rom" and "HXCUFB70_BOOT.rom" to the directory made in step 1.
Procedure
1.
Turn on the power.
2.
Insert the Memory Stick that contains the upgrading program into the Memory Stick slot on the rear panel.
Memory stick slot
HXCU-FB70
Memory stick
2-4
Advertisement
Table of Contents
