Table of Contents
Advertisement
3.
While pressing the optical connector cleaner against the tip of the optical contact, rotate the optical connector cleaner
by 4 to 5 turns clockwise.
Holding the optical connector cleaner at around its support facilitates to apply the pressure.
Alignment sleeve
Optical connector cleaner
Support
Cleaning of connector
Clean the tip of the white optical contacts using the optical connector cleaner.
Optical contact
(white)
When the Optical Connector Cleaner (Commercially Available) is not Available
Tool and fixtures
• Alignment sleeve remover HC-001 (for female connector)
Sony Part No. : J-6480-010-A or DCC.91.312.5LA manufactured by LEMO, or equivalent
Note
Insert the shorter nose end when removing/installing the alignment sleeve. Grasp not the shock absorber portion
of the remover but the handle in use.
Shock
absorber portion
Insert the shorter nose end
• Alcohol (commercially available)
• Cotton swabs (commercially available)
Note
Use a cotton swab whose diameter is about 4 mm. If a cotton swab whose diameter exceeds 5 mm is used, the cotton
swab cannot be inserted into the end of the connector and the tip of the optical contact cannot be cleaned.
Cleaning of male connector
Clean the tip of the white optical contacts with a cotton swab moistened with alcohol.
Optical contacts (white)
HXCU-FB70
Handle
Optical contacts (white)
2-16
Advertisement
Table of Contents
