6-1.
Preparations
6-1-1.
Equipment Required
• SD waveform/vector monitor
• Analog HD waveform monitor
• Oscilloscope: Tektronix TDS460A or equivalent
• Frequency counter: Advantest TR5821AK or equivalent
• Audio oscillator: Tektronix SG-5010 or equivalent
• Audio analyzer
Related equipment
• HD color camera HXC-D70
• HD camera adaptor CA-FB70
• Remote control panel RCP-1500 series
6-1-2.
Precautions on Adjustments
• Warm up the unit for about 10 minutes before starting adjustments.
• All measuring equipment must have been calibrated.
•
"6-1-4. Initial Settings"
• Adjustments for HXC-D70 must have been completed.
6-1-3.
Connection of Equipment
Note
Transmittable Optoelectrical composite cable: CCFN-25/50/100
HD color camera
HXC-D70
HXCU-FB70
Electrical Alignment
must have been completed.
Optoelectrical
composite cable
CCA-5 cable
(max. 50 m)
Remote control panel
RCP-1500 series
Section 6
HD camera control unit
HXCU-FB70
Audio
oscillator
Signal
generator
REFERENCE
/DPR-337F
Waveform
monitor
PIX/CN-3556
75 Ω
75 Ω
6-1