Table of Contents
Advertisement
1-7.
Mounting the Unit in a 19-Inch Rack
This unit can be mounted in a 19-inch EIA standard rack (height: 1.5U).
WARNING
• Secure the rack to the floor.
If the rack falls due to the weight of equipment, it may result in death or serious injury.
Secure the rack to the floor without fail to prevent it from falling or moving.
• Do not mount the unit at a floor height of more than 1 m.
Fall of the rack may result in death or serious injury.
Mount the unit in the rack that is secured to the floor at a floor height within about 1 m.
PREPARATIONS
CAUTION
Be sure to use specified rack-mount rails.
If unspecified rack-mount rails are used, the equipment in the rack may fall due to insufficient strength,
which may result in injury.
When the slide rail 305A-18 is used.
• Slide rail: 1 set
Accuride Japan Model 305A-18 (457 mm)
• Front bracket: 2
Sony Part No.: 2-142-214-01
• Rear bracket: 2
Sony Part No.: 2-142-215-01
• Screw (B4 x 8): 14
• Screw (B5 x 8): 8
• Screw (PWH4 x 20): 2
• Nut: 2
• Plate nut: 2
Sony Part No.: 3-651-812-01
• Rack mount rail screw (PSW5 x 25): 4
When the slide rail C203-18 is used.
• Slide rail: 1 set
Accuride Japan Model C203-18 (457 mm)
• Front bracket: 2
Sony Part No.: 4-444-942-01
• Rear bracket: 2
Sony Part No.: 4-444-942-01
• Screw (B4 x 8): 12
• Screw (B5 x 8): 8
• Screw (PWH4 x 20): 2
• Plate nut: 2
Sony Part No.: 4-443-847-01
• Plate nut: 4
Sony Part No.: 4-444-943-01
• Spacer (M4): 2
Sony Part No.: 4-443-846-01
• Rack mount rail screw (PSW5 x 25): 4
1-7-1.
Mounting the Unit in the Rack (305A-18)
This unit is mounted in the rack by attaching the inner rails at the upper or lower part 1U of height 1.5U.
HXCU-FB70
1-14
Advertisement
Table of Contents
