Table of Contents
Advertisement
5-6.
Switching Regulator (Large)
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the PS cover. (Refer to
Procedure
1.
Disconnect the three harnesses from the three connectors on the switching regulator (large).
2.
Remove the four screws to detach the switching regulator (large).
3.
Remove the slide sheet and the heat conductive sheet PS-1 from the switching regulator (large).
Switching regulator (large)
4.
Install the removed parts by reversing the steps of removal.
HXCU-FB70
"5-1. Top
Cover")
"5-3. PS
Cover")
PSW3 x 6
Connector
Harness
Slide sheet
PSW3 x 6
Heat conductive sheet PS-1
Connectors
Harnesses
5-7
Advertisement
Table of Contents
