Connecting To Power Supply And Other Devices; Supplying Power From The Poe Device; Power Supply Unit - Sony RMU-01 Operating Instructions Manual

Remote control unit

Hide thumbs Also See for RMU-01:

Brochure (2 pages)

Table Of Contents

Table of Contents

Connecting to

Power Supply and

Other Devices

Notes

• For connections, use a category 5 or

superior LAN cable.

• Use a LAN cable with a maximum length

of 100 m (330 ft) for connecting the

devices (PoE hub, receivers, etc.).

• When the PoE power supply unit that

does not have the repeater function is

connected between this unit and the

DWR-R01D or the hub, keep the total

cable length at 100 m (330 ft) or shorter.

• Using self-made LAN cables may result

in network connection failure. Use

commercially available LAN cables,

instead.

Connections and the type of LAN cables

depend on the power supply method to this

unit.

Supplying Power From the

PoE Device

The examples of connections when the

power is supplied from the PoE device to

this unit are shown below.

To supply power from the PoE

hub

DWR-R01D

1) Straight cable

To supply power from the PoE

power supply unit

• When only one receiver (such as the

DWR-R01D) or the PC is connected to

this unit and the power is supplied to this

unit from the PoE power supply unit

PoE power

supply unit

1) Cross cable

2) Straight cable

• When multiple devices including this

unit and the receivers are connected and

the power is supplied to this unit from the

PoE power supply unit