Table of Contents
Advertisement
5-8.
AT-191 Board/Lithium Battery
Preparation
1.
Remove the top cover. (Refer to
Procedure
1.
Remove the lithium battery.
2.
Disconnect the three flexible flat cable (45 core) from the connector (CN1, CN2 and CN600) on the AT-191 board.
3.
Open the clamp.
4.
Disconnect the harness from the connector (CN2) on the AT-191 board.
HXCU-FB70
"5-1. Top
Cover")
5-9
Advertisement
Table of Contents
