Omron SYSMAC C200H Installation Manual page 7

About this Manual:
This manual describes the installation C200H C-series Programmable Controllers using the C200H-
CPU21-E, C200H-CPU23-E, or C200H-CPU31-E CPUs, and it includes the sections described below.
Programming and operating information is provided in the C200H (CPU21-E/23-E/31-E) Programmable
Controller Operation Manual.
Please read this manual completely and be sure you understand the information provide before attempt-
ing to install a C200H PC.
Section 1 is an introduction to Programmable Controllers. General information about what a Programma-
ble Controller can do and how a Programmable Controller works is provided.
Section 2 provides a description of all the components of the C200H. The names of all the individual parts
of each Unit are given.
Section 3 explains how to assemble the C200H. A detailed description of how to mount each Unit is pro-
vided.
Section 4 outlines the system connections involved in installing a C200H Programmable Controller Sys-
tem. All I/O, including Remote I/O, is included.
Section 5 contains the requirements for the installation environment of the C200H. Suggestions for pre-
venting electrical noise are included.
Section 6 explains the power considerations involved in installing the C200H.
Section 7 lists safety considerations that should be kept in mind while installing the C200H.
Section 8 outlines certain consumable items in a PC (such as fuses, Relays, or batteries) that need occa-
sional replacement. This section explains how to replace each of these items.
Appendixes, a Glossary, and an Index are also provided.
WARNING
! Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ix