Omron SYSMAC C200H Installation Manual page 25

CPU Units
1, 2, 3...
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
If you are using the C200H-CPU31-E, a SYSMAC LINK Unit or a SYSMAC LINK
Unit can be mounted to either of the two slots to the left of the CPU Unit. They are
then connected to the CPU Unit with the Bus Connector Unit.
1. Remove the cover from the peripheral device connector with a standard
screwdriver.
2. Connect the CPU Unit-mounting Programming Console to the peripheral
device connector.
3. Attach the CPU Unit-mounting Programming Console to the CPU Unit by
tightening the mounting screws.
A-shape I/O Units
Section 2-2
Peripheral
device
CPU Rack
15