PCM-3110 Hardware Installation
PCM-3110
PC/104 PCMCIA module
D1 D2
J3
D1 LED: Battery LED (Yellow)
D2 LED: Busy LED (Red)
I/O Address: 3E0h/3E1h
IRQ: Interrupt steering for the card status change interrupt
JP2: External power connector
Package Contents Checklist
When you open your PCM-3110 for the first time, first check that all
the following items are present:
•
One PCM-3110 PCMCIA module
• Your choice of one of the following PCMCIA software packages
from SystemSoft Corporation: Cardsoft 3.1 for DOS 5.0 or
higher, CardWizard for Windows 3.1 or higher, CardWorks for
Windows 95, Cardwizard-NT for Windows NT. Additional
software is available for purchase separately.
• Spacer and screw
•
This user's manual.
If any of the above items is missing or appears to be damaged in any
way, please consult with the dealer from whom you purchased your unit
immediately.
U6
B1 A1
JP2
HARDWARE INSTALLATION
J1
J2
C0 D0
JP1
1 2
2-3