Other Pictograms; Intended Use - Optimum Optimill BF 30V Operating Manual

1.2.2 Other pictograms

Activation forbidden!
Warning tilting danger!
Pull the main plug!
Use protective suit!
1.3

Intended use

WARNING!
In the event of improper use, the drilling-milling machine

will endanger personnel,

the drilling-milling machine and other material property of the operating company
will be endangered,

the correct function of the drilling-milling machine may be affected.
The drilling-milling machine is designed and manufactured to be used for milling and drilling
cold metals or other non-flammable materials or materials that do not constitute a health hazard
by using commercial milling and drilling tools.
The drilling-milling machine must only be installed and operated in a dry and well-ventilated
place.
If the drilling-milling machine is used in any way other than described above, modified without
the approval of the company Optimum Maschinen Germany GmbH then the drilling-milling
machine is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH. It is also part of intended use that

the maximum values for the drilling-milling machine are complied with,

the operating manual is observed,

the inspection and maintenance instructions are observed.

"Technical data" on page 17
Safety
Version 1.1.5 dated 2015-08-31
Warning of flammable sub-
stances!
Warning of automatic start-
up!
Use safety glasses! protec-
tion
Use ear protection!
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Warning of suspended loads!
Warning of biological hazard!
Use face shield!
Protect the environment!
Warning risk of stumbling!
Read the operating instruc-
tion!
Use protective boots!
Contact address
BF30Vario GB
Page 7