Reasonably Foreseeable Misuses; Avoiding Misuses - Optimum Optimill BF 30V Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
WARNING!
Heaviest injuries through improper use.
It is forbidden to make any modifications or alterations to the operating values of the
drilling-milling machine. These could endanger the staff and cause damage to the
drilling-milling machine.
INFORMATION
The drilling-milling machine is built according to the standard DIN EN 55011 class A.
WARNING!
The class A (machine tools) is not intended to be used in residential facilities, where the
power is supplied via a public low voltage supply system. In these areas it may possi-
bly be difficult to guarantee electromagnetic compatibility due to lead bound as well as
emitted interferences.
ATTENTION!
If the drilling-milling machine is not used as intended or if the safety directives or the
operating instructions are ignored the liability of the manufacturer for any damages to
persons or objects resulting hereof is excluded and the claim under guarantee is
becoming null and void!
1.4

Reasonably foreseeable misuses

Any other use as the one determined under the "Intended use" or any use beyond the
described use shall be deemed as not in conformity and is forbidden.
Any other use has to be discussed with the manufacturer.
It is only allowed to process metal, cold and non-inflammable materials with the milling-
machine.
In order to avoid misuses it is necessary to read and understand the operating instructions
before the first commissioning.
The operators must be qualified.

1.4.1 Avoiding misuses


Use of suitable cutting tools.

Adapting the speed adjustment and feed to the material and workpiece.

Clamp workpieces firmly and vibration-free.
For the drilling-milling machine there are conversion kits.
The attachments are provided as a kit to computer-controlled milling (CNC Computerized
numerical control). However, the control of the step motors can also be done manually via a
special controller (control, potentiometer). A step motor control is required in each case.
The BF30Vario must only be installed and operated in a dry and well-ventilated place.
The machine BF30Vario covered by the standard DIN EN 13128 (milling machines, including
drilling machines). Therein, the manually controlled machines are divided into two classes with
different protection levels, depending on the travel speed of a single power-driven axis. In addi-
tion, the requirements for automatically controlled machines listed (highest level of protection).
The one who changed the manually controlled BF30Vario on CNC control is legally the manu-
facturer of a new machine due to the significant change in the machine and is therefore respon-
sible for compliance with the requirements of the Machinery Directive and the DIN EN 13128.
GB BF30Vario
Page 8 Original operating instructions
Safety
Version 1.1.5 dated 2015-08-31