IBM 9080-M9S Manual page 236

• If you have a single node system configuration, use Figure 197 on page 230 and Table 29 on page
230 to determine the point-to-point cabling for UPIC cables.
Figure 197. Single Node Configuration UPIC Cabling
Table 29. Single Node Configuration UPIC Cabling
Cable number
1
2
• If you have a two, three, or four node system configuration, use Figure 198 on page 231 and Table
30 on page 231 to determine the point-to-point cabling for UPIC cables.
230 Power Systems: Removing and replacing parts in the 9080-M9S system
From
SC1: P1-C1-T1
SC1: P1-C2-T1
To
ND1: P1-C9-T1
ND1: P1-C10-T1