Operation - Gira 5023 00 Manual

Switching actuator / blind actuator 16 A Standard & Komfort
– Sun protection function with heating/cooling operation
– Disabling function (lock-out protection)
– Scene function
Logic function characteristics
– Logic gates
– Transformer (conversion)
– Disabling element
– Comparator
– Limit value switch
4

Operation

(4) Status LEDs for outputs
ON: Relay output closed
OFF: Relay output opened
Flashes slowly: output in manual mode selected
Flashes quickly: Output disabled via continuous manual mode
(6) Button ǃ
Manual operation
(7) LED ǃ
ON: continuous manual mode active / Flashing: temporary manual control active
(8) LED DŽ
ON: relay outputs closed, manual operation active
(9) Button DŽ
Short: switch on, adjust slats or stop.
Long: Move hanging upwards
(10) Button Dž
Short: switch off, adjust slats or stop.
Long: Move hanging downwards.
(11) LED Dž
ON: relay outputs open, manual control active
(12) Button ALL OFF
Open all relay outputs, stop drives
In operation with the button field the device distinguishes between a short and a long press.
– Short: actuation for less than 1 s
– Long: actuation of between 1 and 5 s
In switching operation, the device distinguishes between the operating modes "normally
open contact" and "normally closed contact". The buttons (9 + 10) change the switching
status when pressed:
82402612
Figure 2: Operating elements
23.09.2020
3 / 9