Information For Electrically Skilled Persons - Gira 5023 00 Manual

Switching actuator / blind actuator 16 A Standard & Komfort
Switching outputs: depending on the programming, the output relays switch to the position
that is active after the manual mode is switched off, e.g. to the forced position, logic func-
tion.
Blind/shutter outputs: depending on the programming, the hangings move to the position
that is active after the manual mode is switched off, e.g. to the forced position, safety or
sun protection position.
Operating an output in manual mode
￭ Activate short-term or permanent manual operation.
￭ Press button ǃ (1) repeatedly until LED A1... (4) of the desired output or output pair
flashes.
￭ Press button DŽ (9) or Dž (10).
Short: Switch on/off, drive stop
Long: Move blind/shutter upwards/downwards
LED DŽ (3) ON: Relay output closed
LED Dž (6) OFF: Relay output opened
Short-term manual operation: After running through all of the outputs the device exits
manual mode after another brief press.
Switching off all outputs / Stopping all hangings
The device is in continuous manual mode.
￭ Press the ALL OFF button (7).
Switching outputs: All outputs switch off (NO operating mode: relay output opened/NC op-
erating mode: relay output closed).
Venetian blind outputs: All blinds/shutters stop.
Disabling outputs
The device is in continuous manual mode. The bus control can be disabled (ETS parameter).
Press button ǃ (6) repeatedly until LED A1... (4) of the desired output or output pair
￭
flashes.
￭ Press the/ DŽ (9) and / Dž (10) buttons simultaneously for approx. 5 s.
Selected output is disabled.
The status LED A1... (4) of the selected output or output pair flashes quickly.
A disabled output can be operated in manual mode.
Re-enabling outputs
The device is in continuous manual mode. One or more outputs were disabled in manual mode.
￭ Press button ǃ (6) repeatedly until the output to be unlocked or the output pair is selec-
ted.
￭ Press the/ DŽ (9) and / Dž (10) buttons simultaneously for approx. 5 s.
Disabling is deactivated.
The LED A1... (4) of the selected output or output pair flashes slowly.
5

Information for electrically skilled persons

DANGER!
Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
82402612 23.09.2020
5 / 9