Elitech NANODUCT 1030 User Manual page 29

Section 2 : Initial System Setup
The following is a sequence of displays when working in Demo Mode. From the Demo Mode main menu,
select Iontophoresis and press ENTER. To advance to the next screen, press ENTER or wait for the test to
complete.
DEMO MODE
2019-04-15 12:03
Exit
Check Controls
Iontophoresis
Sweat Analysis
Recall Reading
Iontophoresis
DEMO MODE
Increasing
Current
Iontophoresis
DEMO MODE
Full
Current
Iontophoresis
DEMO MODE
Decreasing
Current
ENTER To Continue
DEMO MODE
Iontophoresis
Complete
DEMO MODE
2019-04-15 12:04
Exit
Check Controls
Iontophoresis
Sweat Analysis
Recall Reading
Sweat Analysis
DEMO MODE
Suppress Readings
Display Readings
Sweat Analysis
DEMO MODE
Please Wait . . .
Sweat Analysis
DEMO MODE
Sweat At
First Electrode
Sweat Analysis
DEMO MODE
Electrolyte
Concentration
27 mmol/L eq NaCl
Initial sweat rate
2.1 g/m 2 /min
Sweat Analysis
DEMO MODE
Averaging Concentration
27 mmol/L eq NaCl
Initial Sweat Rate
2.1 g/m 2 /min
DEMO MODE
2019-04-15 12:05
Mean Electrolyte
Concentration
27 mmol/L eq NaCl
Initial Sweat Rate
2.1 g/m 2 /min
Complete
DEMO MODE
2019-04-15 12:06
Exit
Check Controls
Iontophoresis
Sweat Analysis
Recall Reading
DEMO MODE
2019-04-15 12:06
Mean Electrolyte
Concentration
27 mmol/L eq NaCl
Initial Sweat Rate
2.1 g/m 2 /min
ENTER To Continue
DEMO MODE
2019-04-15 12:06
Exit
Check Controls
Iontophoresis
Sweat Analysis
Recall Reading
29