Section 2 : Initial System Setup
2.2 Menu Basics
ELITechGroup
NANODUCT 1030
(Software Part No.)
(Release Date)
English
NANODUCT
YYYY-MM-DD HH:MM
Check Controls
Iontophoresis
Sweat Analysis
Recall Reading
SETUP MENU
YYYY-MM-DD HH:MM
Exit
Configure
Self Test
Demo Mode
Startup Menu
When the Nanoduct is first powered on (by pressing the ON key), a sign-on
screen appears for a few seconds, similar to the one at the left. The sign-on
screen includes ELITechGroup's name, the Nanoduct product name, the software
part number, the release date, and the display language. The Nanoduct then
performs a system check with a "Checking Operation" message displaying briefly.
After the sign-on screen, the display advances to the main menu. The menu
selections are covered later in the manual.
Accessing the Setup Menu
The SETUP MENU allows the instrument to be customized for individualized use,
to run an instrument self test, or to operate the instrument in a demonstration
mode.
1. Make sure the Nanoduct is OFF. While pressing and holding down the
SELECT key, press the ON key. Keep the SELECT key pressed until the
SETUP MENU displays on the screen. (When the Nanoduct first turns on, a
sign-on screen appears for a few seconds. The Nanoduct then performs a
system check and a "Checking Operation" message displays, followed by
the SETUP MENU.)
Scroll down through the menu by pressing SELECT. When the pointer
reaches the last item in the menu, pressing SELECT returns the pointer to
the top of the menu.
Make selections by pressing ENTER when the pointer is next to the desired
menu item.
Select "Exit" and press ENTER to return to the main operation menu.
22