Setting Options - Elitech NANODUCT 1030 User Manual

Section 2 : Initial System Setup
CONFIGURE MENU
Exit
Set Clock
Set Options
Set Language
Set Display Option
For Sweat Analysis
Suppress Readings
Display Readings
Calibration Option
On Start Up
Cal Optional
Force Cal

Setting Options

1. From the CONFIGURE MENU, select "Set Options" and press ENTER.
2. To display or suppress the results of the sweat test, select either "Suppress
Readings" or "Display Readings" and press ENTER.
3. The Calibration Option menu allows the instrument to automatically go to
the Check Controls menu or the main menu on power-up. Select "Force
Cal" to automatically go to the Check Controls on power-up. Select "Cal
Optional" to calibrate only under user control and to automatically go to the
main menu on power-up. Press ENTER when the desired selection has
been made. The default setting is "Cal Optional."
25