Avaya Vantage K155 Manual page 49

• Ensure that you have the following items:
- A cradle wall-mount kit containing a wall-mount bracket. You must order this part
separately.
- Two or four screws depending on how you are mounting your Avaya Vantage
You need four screws if you are mounting the device using screws. If you are mounting the
device on a telephone wall plate, you only need two screws for the handset cradle. The
handset cradle uses the same type of wall mounting screws as the Avaya Vantage
device.
- Phillips-head screwdriver.
- Pencil.
- An Ethernet cable. If you are mounting the device on a telephone wall plate, use a short
cable.
Procedure
1. Use a pencil to mark screw holes.
• If you are using screws to mount the Avaya Vantage
holes, where each pair has two holes that are vertically spaced at 4 inches apart. Keep
a horizontal distance of 3.47 inches between the two pairs of screw holes.
• If you are mounting the device on a pre-installed telephone wall plate, mark two screw
holes for the handset cradle to the left of the wall-mount plate. You must space the
screw holes horizontally from each stud on the wall plate by 3.47 inches.
April 2021 Using Avaya Vantage
Comments on this document? infodev@avaya.com
Wall mounting options for Avaya Vantage
™
device, mark two pairs of screw
™
™
™
device.
™
49